Wet Area White
Selleys Wet Area Silicone Sealant is ideal for use in bathrooms, kitchens and laundries and delivers a superior waterproof and mould resistant seal that will not shrink, crack or peel away.
Features
100% silicone sealant
Waterproof seal – superior adhesion and resistance to lifting provides a long lasting, flexible seal
Mould resistant – helps prevent growth of unsightly black mould and fungus
Available in a range of colours to suit most wet areas
Non corrosive neutral cure formula
Ideal For
Ceramics, glass and metals
Categories: All Products, Sealants
Product Specs
| Size | 75g Tube / 300g tube |
|---|---|
| Colour | White |
| Full Cure Time | Cures in 8 hours, best to be left for 24 hours |
| Technology | Neutral Cure Silicone |
| Use | Interior, Exterior |
How To Use
Use in a well ventilated area. Avoid contact with skin and eyes.
- Ensure surfaces are clean (can be applied on wet or damp surface, its ideal if the surface is dry).
- Apply a layer of masking tape along the perimeter line where Selleys all clear is to be applier.
- Pierce tube with reversed side of cap.
- Attach the supplied nozzle on the pierced tube and cut the tip of nozzle at 45 degree angle.
- Apply on needed surface and, smoothen with a scraper or spatula.
- Once applied, peel of the masking taped along the perimeters for a clean finishing & leave the sealant to dry for at least 2 hours before using the area.
Handy Tips
- For neater joints, mask sides before applying sealant and remove tape before sealant skins.
- When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
- Work in sections that can be completed before sealant skins.
- Tooling off and tape removal must be completed before skinning occurs, or a rough surface may result. Working in sections allows for a better finish.
Clean Up
While the sealant is still wet, clean off excess sealant with a cloth soaked with acetone
Cured product can be removed by cutting and scraping