N70 PVC Solvent Cement is a strong adhesive to connect PVC pipe and joints together. This is the product that you need for your plumbing jobs. This is a clear solvent with fast setting effect.
Directions
1. Make sure that the surfaces must be clean, dry, free of dirt, grease, oil or water. Clean pipe and fitting.
2. Stir the solvent before use. Apply N70PVC Solvent Cement on botht the surfaces with a dry and clean brush to give a uniform coating. It is advisable to have heavier coating at the pipe ends.
3. Allow the solvents to evaporate until the cement film is "tacky". It will take between 3 to 5 minutes depending upon weather conditions.
4. Hold firmly for few seconds to allow initial bonding, then wipe on surplus cement.
5. Allow 24 hours before tesing on pipe up to 2'. Allow 48 hours on pipe up to 6'. Longer cure time may be required on damp, cold day.
Storage
- Highly inflammable. Keep away from heat source or naked flames. Store in dry and cool place in room temperature.
- Use within 12 months from date of production.